Here are some excellent ideas, from the Federal Trade Commission (FTC), that may help secure your wireless network:
Manufacturers often deliver wireless routers with the encryption feature turned off. You must turn it on. The directions that come with your wireless router should explain how to do that. If they don’t, check the router manufacturer’s website.
Two main types of encryption are available: Wi-Fi Protected Access (WPA) and Wired Equivalent Privacy (WEP). Your computer, router, and other equipment must use the same encryption. WPA is stronger; use it if you have a choice. It should protect you against most hackers.
Some older routers use only WEP encryption, which is better than no encryption. It should protect your wireless network against accidental intrusions by neighbors or attacks by less-sophisticated hackers. If you use WEP encryption, set it to the highest security level available.
2. Use anti-virus and anti-spyware software, and a firewall. Computers on a wireless network need the same protections as any computer connected to the Internet. Install anti-virus and anti-spyware software, and keep them up-to-date. If your firewall was shipped in the “off” mode, turn it on.
3. Turn off identifier broadcasting. Most wireless routers have a mechanism called identifier broadcasting. It sends out a signal to any device in the vicinity announcing its presence. You don’t need to broadcast this information if the person using the network already knows it is there. Hackers can use identifier broadcasting to home in on vulnerable wireless networks. Disable the identifier broadcasting mechanism if your wireless router allows it.
4. Change the identifier on your router from the default. The identifier for your router is likely to be a standard, default ID assigned by the manufacturer to all hardware of that model. Even if your router is not broadcasting its identifier to the world, hackers know the default IDs and can use them to try to access your network. Change your identifier to something only you know, and remember to configure the same unique ID into your wireless router and your computer so they can communicate. Use a password that’s at least 10 characters long: The longer your password, the harder it is for hackers to break.
5. Change your router’s pre-set password for administration. The manufacturer of your wireless router probably assigned it a standard default password that allows you to set up and operate the router. Hackers know these default passwords, so change it to something only you know. The longer the password, the tougher it is to crack.
6. Allow only specific computers to access your wireless network. Every computer that is able to communicate with a network is assigned its own unique Media Access Control (MAC) address. Wireless routers usually have a mechanism to allow only devices with particular MAC addresses access to the network. Some hackers have mimicked MAC addresses, so don’t rely on this step alone.
7. Turn off your wireless network when you know you won’t use it. Hackers cannot access a wireless router when it is shut down. If you turn the router off when you’re not using it, you limit the amount of time that it is susceptible to a hack.
8. Don’t assume that public “hot spots” are secure. Many cafés, hotels, airports, and other public establishments offer wireless networks for their customers’ use. These “hot spots” are convenient, but they may not be secure. Ask the proprietor what security measures are in place.
Be careful about the information you access or send from a public wireless network. To be on the safe side, you may want to assume that other people can access any information you see or send over a public wireless network. Unless you can verify that a hot spot has effective security measures in place, it may be best to avoid sending or receiving sensitive information over that network.
For more information on wireless network security, go to FTC.gov.
*********
This column is provided for general information purposes only. Please check with your local law enforcement agency and legal professional for information specific to you and your jurisdiction.
The information in this article is provided “as is”, with all faults, expressed or implied. The author and/or publisher and/or copyright holder makes no guarantee regarding the accuracy or completeness of the information. In no event shall the author and/or publisher and/or copyright holder be liable for any incidental or consequential damages, punitive damages, lost profits, and/or any indirect damages.
